Difference between revisions of "Interactive lasers"

From Tmplab
(Hardware)
Line 15: Line 15:
  
 
* a green DIY laser made at [http://blog.blackboxe.org/?m=201407&lang=en la Blackboxe] with a [http://www.macpod.net/electronics/lasershark/lasershark.php lasershark] USB DAC card.
 
* a green DIY laser made at [http://blog.blackboxe.org/?m=201407&lang=en la Blackboxe] with a [http://www.macpod.net/electronics/lasershark/lasershark.php lasershark] USB DAC card.
* an ilda RGB commercial laser for clubs with an [http://ether-dream.com/ Etherdream] USB DAC card. Obviously is much more expensive but has some great advantage : the ether dream is directly tcp/IP controlled, so you can imagine very cool projects with very easy setup and of course the programming langage you prefer.
+
* an ilda ports RGB commercial laser for clubs with an [http://ether-dream.com/ Etherdream] USB DAC card. Obviously is much more expensive but has some great advantage : the ether dream is directly tcp/IP controlled, so you can imagine very cool projects with very easy setup and of course the programming langage you prefer.
  
 
=== Commercial Lasers ===
 
=== Commercial Lasers ===

Revision as of 16:04, 1 January 2015

(WIKI IN PROGRESS)

Goals

Different levels of complexity are possible. Commercial lasers uses ilda files/connections to draw whatever you want, but you can build your own, see hardware section.

  • The very fast and easy plan is to switch ilda scenes according to some inputs. You can use already made ilda files (see download section) in a SDcard plugged inside the laser fixture and use DMX protocol to switch. DMX usb cards are cheap, usually we use enttec ones. DMX controlled lasers are cheaper than
  • If the plan is too draw live, it depends on the laser fixture DIY or commercial. Lot of possibilities depending on the number of colors, from using an arduino, a 5.1 USB soundcard upt to use commercially (opensource) cards using the standarts ilda connect ports.

Hardware

Obviously there is DIY Lasers and commercial ones and there is a bunch of cards integrating some DACs to talk to the laser fixture.
A great forum for bootstrap your project is laser freak that comes in different langages.

We play with two different setups :

  • a green DIY laser made at la Blackboxe with a lasershark USB DAC card.
  • an ilda ports RGB commercial laser for clubs with an Etherdream USB DAC card. Obviously is much more expensive but has some great advantage : the ether dream is directly tcp/IP controlled, so you can imagine very cool projects with very easy setup and of course the programming langage you prefer.

Commercial Lasers

Ether dream dac