Arduino screen
From Tmplab
Revision as of 21:46, 30 January 2016 by Samneurohack (talk | contribs) (New page: = Easy Arduino TFT screen = == Hardware == * you want to display some data/state of your arduino * If you're fed up or can't use the serial line Try the very cheap tft screen for arduin...)
Easy Arduino TFT screen
Hardware
- you want to display some data/state of your arduino
- If you're fed up or can't use the serial line
Try the very cheap tft screen for arduino.
Pictures+Library u8glib on github
It can be as low as 4 pin to connect in i2c :
- VCC (5V)
- GND
- SCL (a clock) goes by default to arduino A5
- SDA for data goes by default to arduino A4
Software
If you use the 4 pin display and u8glib, the line you need to remove comment (// at the beginning )is :
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC
See u8glib examples sketch.
