Chip Reverse Engineering

From Tmplab

(Difference between revisions)
Jump to: navigation, search
(Links)
(Leads)
Line 13: Line 13:
** not perfect but should enable us to do the first etching/abrasive steps
** not perfect but should enable us to do the first etching/abrasive steps
* Ebay? No perfect match yet.
* Ebay? No perfect match yet.
 +
* Microscope.fr solution
 +
** Euromex
 +
*** [http://www.optical-systems.com/euromex-xe5627-discussion-microscope-p-3134.html Euromex XE.5627 Discussion Microscope] (299 EUR)
 +
*** [http://www.optical-systems.com/euromex-ae5175-ballbeared-mechanical-stage-p-3972.html Euromex AE.5175 Ball-beared mechanical stage] (169 EUR)
 +
*** either [http://www.optical-systems.com/euromex-dc3200-cmex3-digi-cmos-microscope-camera-p-3941.html Euromex DC.3200 CMEX-3 DIGI CMOS Microscope camera (3 MP)] (989 EUR) or [http://www.optical-systems.com/euromex-dc1300-cmex1-digi-cmos-microscope-camera-p-3942.html Euromex DC.1300 CMEX-1 DIGI CMOS Microscope camera (1.3 MP)] (469 EUR)
 +
*** Total: from 937 EUR to 1457 EUR
== Links ==
== Links ==
* http://www.microscopesinfo.com/olympusmicroscope/
* http://www.microscopesinfo.com/olympusmicroscope/
* http://sci.tech-archive.net/Archive/sci.techniques.microscopy/2005-10/msg00004.html
* http://sci.tech-archive.net/Archive/sci.techniques.microscopy/2005-10/msg00004.html

Revision as of 09:08, 5 July 2008

Contents

Microscope

Features

These are the features we're looking for:

  • 500x magnification
  • 2 MP to 8 MP camera
  • Objective table to move the chip slowly (i.e. not by hand, too much shaking and imprecision)

Feature we DON'T NEED:

  • Confocal microscope (it seems, because we'll abrase/grind away the upper layers anyway and the bottom layers are opaque anyway too)

Leads

Links

Personal tools