Chip Reverse Engineering
Thanks to Karsten Nohl presentation at Hacker Space Fest, there's an interesting DIY approach for reverse engineering.
These are the features we're looking for:
- 500x magnification
- 2 MP to 8 MP camera
- Objective table to move the chip slowly (i.e. not by hand, too much shaking and imprecision)
Feature we DON'T NEED:
- Confocal microscope (it seems, because we'll abrase/grind away the upper layers anyway and the bottom layers are opaque anyway too)
- Friend of Phil will lend a microscope with camera
- not perfect but should enable us to do the first etching/abrasive steps
- Ebay? No perfect match yet.
- Microscope.fr solution
- Different leads from microscope.fr website
- Euromex XE.5627 Discussion Microscope (299 EUR)
- Euromex AE.5175 Ball-beared mechanical stage (169 EUR)
- either Euromex DC.3200 CMEX-3 DIGI CMOS Microscope camera (3 MP) (989 EUR) or Euromex DC.1300 CMEX-1 DIGI CMOS Microscope camera (1.3 MP) (469 EUR)
- Total: from 937 EUR to 1457 EUR
- Comparison of different microscope imaging solutions
- Adaptor for standard cameras
- Moticam review and some tips
- ebay search for adaptators
- Custom made camera couplers
- What kind of glue to use to attach the chip to solid/manoeuvrable support?