Nico: New page: = How to use the (fscking) tracer = The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module. == Network Settings == IP: 10.0.0.8 Name: trace...

Nico — Fri, 13 Nov 2009 02:04:59 GMT

New page: = How to use the (fscking) tracer = The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module. == Network Settings == IP: 10.0.0.8 Name: trace...

New page

= How to use the (fscking) tracer =

The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module.

== Network Settings ==

IP: 10.0.0.8
Name: tracer

== On Windows ==

1. Install the HP port monitor
ftp://ftp.hp.com/pub/softlib/software10/COL25578/jd-65723-1/HPTcpMon.zip

2. Install the HP printer driver
ftp://ftp.hp.com/pub/softlib/software3/COL3190/pl-10683-3/pl532en.exe

3. Run the "Add printer..." wizard

4. Choose to add a local printer, make sure that "Autocrappy discovery of Plug-and-Pray printers" is not selected

5. Create a new printing port using "HP Standard TCP/IP port", use "tracer" or "10.0.0.8" for the printer name and whatever you find relevant for the port name

6. On the driver list, click "Have disk..." and select the directory where you install the HP printer driver, then select "HP" in the manufacturer list and "HP DesignJet 750C+ (D/A1) by HP" in the printer list

7. You're done

HowToUseTheTracer - Revision history

Nico: New page: = How to use the (fscking) tracer = The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module. == Network Settings == IP: 10.0.0.8 Name: trace...