HowToUseTheTracer

From Tmplab
Revision as of 03:04, 13 November 2009 by Nico (talk | contribs) (New page: = How to use the (fscking) tracer = The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module. == Network Settings == IP: 10.0.0.8 Name: trace...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

How to use the (fscking) tracer

The tracer is an HP DesignJet 750C Plus with an embedded JetDirect (J4100A) network interface module.

Network Settings

IP: 10.0.0.8 Name: tracer

On Windows

1. Install the HP port monitor

  ftp://ftp.hp.com/pub/softlib/software10/COL25578/jd-65723-1/HPTcpMon.zip

2. Install the HP printer driver

  ftp://ftp.hp.com/pub/softlib/software3/COL3190/pl-10683-3/pl532en.exe

3. Run the "Add printer..." wizard

4. Choose to add a local printer, make sure that "Autocrappy discovery of Plug-and-Pray printers" is not selected

5. Create a new printing port using "HP Standard TCP/IP port", use "tracer" or "10.0.0.8" for the printer name and whatever you find relevant for the port name

6. On the driver list, click "Have disk..." and select the directory where you install the HP printer driver, then select "HP" in the manufacturer list and "HP DesignJet 750C+ (D/A1) by HP" in the printer list

7. You're done