RFID - Revision history

Reverse22 at 06:22, 4 January 2012

Reverse22 — Wed, 04 Jan 2012 06:22:59 GMT

←Older revision		Revision as of 06:22, 4 January 2012
Line 83:		Line 83:
	00000549 Card ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 0B 00 00 00 00 00 00 63		00000549 Card ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 0B 00 00 00 00 00 00 63
	00922388 eventhandler.c:364:EHStatusHandlerThread() Card Removed From OMNIKEY CardMan 5x21 00 01		00922388 eventhandler.c:364:EHStatusHandlerThread() Card Removed From OMNIKEY CardMan 5x21 00 01
		+	[http://www.prlog.org/11289974-phone-number-lookup-verizon-phone-number-reverse-lookup-to-get-information-you-need-quickly.html phone 800 phone number lookup]
		+
		+	[http://thetvtopc.com/Reverse_Cell_Phone_Lookup_Number rreverse phone lookup consumer reports]

Phil: /* Mac Setup */

Phil — Wed, 25 Jun 2008 15:47:18 GMT

Mac Setup

←Older revision		Revision as of 15:47, 25 June 2008
Line 7:		Line 7:
	* [http://www.amk.ca/python/code/crypto.html pycrypto]		* [http://www.amk.ca/python/code/crypto.html pycrypto]
	* [http://ludovic.rousseau.free.fr/softwares/pcsc-tools/ pcsc tool]		* [http://ludovic.rousseau.free.fr/softwares/pcsc-tools/ pcsc tool]
		+
		+	No support for the RFID part yet, the smart card (with contact) works ok.

	= EEE Setup =		= EEE Setup =

Phil: /* Install error */

Phil — Wed, 25 Jun 2008 15:30:52 GMT

Install error

←Older revision		Revision as of 15:30, 25 June 2008
Line 32:		Line 32:
	= Debian EEE Setup =		= Debian EEE Setup =

-	== Install ~~error~~ ==	+	== Install problem ==
	There's a big problem with the install is that you SHOULD NOT install the libhal support which is compiled by default in the debian packages.		There's a big problem with the install is that you SHOULD NOT install the libhal support which is compiled by default in the debian packages.

Line 73:		Line 73:
	00000448 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0		00000448 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com		OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com
		+
		+	== First readings ==
		+
		+	I approach a Mifare card close to the reader and here is our result:
		+
		+	99999999 eventhandler.c:432:EHStatusHandlerThread() Card inserted into OMNIKEY CardMan 5x21 00 01
		+	00000549 Card ATR: 3B 8F 80 01 80 4F 0C A0 00 00 03 06 0B 00 00 00 00 00 00 63
		+	00922388 eventhandler.c:364:EHStatusHandlerThread() Card Removed From OMNIKEY CardMan 5x21 00 01

Phil: /* Debian EEE Setyup */

Phil — Wed, 25 Jun 2008 15:27:14 GMT

Debian EEE Setyup

←Older revision		Revision as of 15:27, 25 June 2008
Line 30:		Line 30:
	ln -s /usr/local/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle /usr/lib/pcsc/drivers		ln -s /usr/local/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle /usr/lib/pcsc/drivers

-	= Debian EEE ~~Setyup =~~	+	= Debian EEE Setup =
-		+
-	~~== Commands =~~=	+

	== Install error ==		== Install error ==

Phil: /* EEE Setup */

Phil — Wed, 25 Jun 2008 15:26:19 GMT

EEE Setup

←Older revision		Revision as of 15:26, 25 June 2008
Line 9:		Line 9:

	= EEE Setup =		= EEE Setup =
-	* EEE pc 401	+	* EEE pc 401 with either Xandros or Debian EEE
	* Debian pcscd package		* Debian pcscd package
	* Debian pcsc-tools package		* Debian pcsc-tools package
Line 27:		Line 27:
	ln -s /usr/local/include/PCSC /usr/include/		ln -s /usr/local/include/PCSC /usr/include/

-		+	== driver location problem ==
-	~~== Solved errors ==~~	+
-	=== driver location problem ===	+
	ln -s /usr/local/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle /usr/lib/pcsc/drivers		ln -s /usr/local/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle /usr/lib/pcsc/drivers
-
-	== Remaining errors ==
-	00001732 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_76b_5321_noserial_if0
-	01013021 readerfactory.c:1135:RFInitializeReader() Attempting startup of OMNIKEY CardMan 5x21 00 00 using /usr/lib/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
-	00000830 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
-	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com
-	00000205 readerfactory.c:1174:RFInitializeReader() Open Port 200000 Failed (usb:076b/5321:libhal:/org/freedesktop/Hal/devices/usb_device_76b_5321_noserial_if0)
-	00000022 readerfactory.c:1047:RFUnloadReader() Unloading reader driver.
-	00000079 readerfactory.c:254:RFAddReader() OMNIKEY CardMan 5x21 init failed.
-	00000028 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0
-	00008472 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
-
-	and
-
-	eeepc-phil:/home/user/p/ifdokrfid_lnx-2.6.0> pcscd -f -d
-	00000000 pcscdaemon.c:275:main() pcscd set to foreground with debug send to stderr
-	00001338 debuglog.c:239:DebugLogSetLevel() debug level=debug
-	00002157 pcscdaemon.c:493:main() pcsc-lite 1.4.101 daemon ready.
-	00062472 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0951, PID: 0x1606
-	00004763 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
-	00005616 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
-	00005526 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
-	00005646 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x15CA, PID: 0x00C3
-	00004745 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
-	00005743 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x076B, PID: 0x5321
-	00001230 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_76b_5321_noserial_if0
-	01015973 readerfactory.c:1135:RFInitializeReader() Attempting startup of OMNIKEY CardMan 5x21 00 00 using /usr/local/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
-	00000815 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
-	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com
-	00000207 readerfactory.c:1174:RFInitializeReader() Open Port 200000 Failed (usb:076b/5321:libhal:/org/freedesktop/Hal/devices/usb_device_76b_5321_noserial_if0)
-	00000020 readerfactory.c:1047:RFUnloadReader() Unloading reader driver.
-	00000082 readerfactory.c:254:RFAddReader() OMNIKEY CardMan 5x21 init failed.
-	00000027 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0
-	00006587 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000

	= Debian EEE Setyup =		= Debian EEE Setyup =

Phil: /* Install error */

Phil — Wed, 25 Jun 2008 15:24:33 GMT

Install error

←Older revision		Revision as of 15:24, 25 June 2008
Line 89:		Line 89:
	The solution I found was to install the debian packages pcscd and pcsc-omnikey and then to delete the /usr/sbin/pcscd and overwrite it with a compiled version without the libhal support. There are quite some options to give to the ./configure for this, here they are:		The solution I found was to install the debian packages pcscd and pcsc-omnikey and then to delete the /usr/sbin/pcscd and overwrite it with a compiled version without the libhal support. There are quite some options to give to the ./configure for this, here they are:

-	./configure --disable-libhal --enable-libusb --enable-usbdropdir=/usr/lib/pcsc/drivers/ --enable-ipcdir=/var/run/pcscd/ --prefix=/usr/ --enable-runpid=/var/run/pcscd/pcscd.pid	+	./configure --disable-libhal --enable-libusb --enable-usbdropdir=/usr/lib/pcsc/drivers/ --enable-ipcdir=/var/run/pcscd/ --prefix=/usr/ --enable-runpid=/var/run/pcscd/pcscd.pid

	Then you just run pcscd:		Then you just run pcscd:

-	# /usr/sbin/pcscd -f -d -a	+	# /usr/sbin/pcscd -f -d -a

	And you'll get a better result ;-)		And you'll get a better result ;-)

Phil at 15:23, 25 June 2008

Phil — Wed, 25 Jun 2008 15:23:45 GMT

←Older revision		Revision as of 15:23, 25 June 2008
Line 94:		Line 94:

	# /usr/sbin/pcscd -f -d -a		# /usr/sbin/pcscd -f -d -a
		+
		+	And you'll get a better result ;-)
		+
		+
		+	00000000 pcscdaemon.c:275:main() pcscd set to foreground with debug send to stderr
		+	00000743 debuglog.c:239:DebugLogSetLevel() debug level=debug
		+	00000354 debuglog.c:268:DebugLogSetCategory() Debug options: APDU
		+	00001335 pcscdaemon.c:493:main() pcsc-lite 1.4.101 daemon ready.
		+	00106863 hotplug_libusb.c:476:HPAddHotPluggable() Adding USB device: 001:005
		+	00000499 readerfactory.c:1135:RFInitializeReader() Attempting startup of OMNIKEY CardMan 5x21 00 00 using /usr/lib/pcsc/drivers//ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
		+	00001266 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
		+	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com
		+	00297640 readerfactory.c:305:RFAddReader() Using the pcscd polling thread
		+	00004511 readerfactory.c:1135:RFInitializeReader() Attempting startup of OMNIKEY CardMan 5x21 00 01 using /usr/lib/pcsc/drivers//ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
		+	00000523 readerfactory.c:847:RFLoadReader() Reusing already loaded driver for /usr/lib/pcsc/drivers//ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
		+	00000448 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
		+	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com

Phil at 15:21, 25 June 2008

Phil — Wed, 25 Jun 2008 15:21:51 GMT

←Older revision		Revision as of 15:21, 25 June 2008
Line 70:		Line 70:
	== Commands ==		== Commands ==

-	== ~~Remaining errors~~ ==	+	== Install error ==
		+	There's a big problem with the install is that you SHOULD NOT install the libhal support which is compiled by default in the debian packages.

		+	When you have libhal support, here is what you get:

	13431722 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x076B, PID: 0x5321		13431722 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x076B, PID: 0x5321
Line 82:		Line 84:
	00000353 readerfactory.c:254:RFAddReader() OMNIKEY CardMan 5x21 init failed.		00000353 readerfactory.c:254:RFAddReader() OMNIKEY CardMan 5x21 init failed.
	00000301 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0		00000301 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0
		+
		+	In order to get rid of that problem, you must recompile pcsc-lite without the support for LIBHAL. Other problem then arise with for example the fact that the pcsc-lite then doesn't create the /usr/local/pcsc/drivers or /usr/lib/pcsc/drivers directories.
		+
		+	The solution I found was to install the debian packages pcscd and pcsc-omnikey and then to delete the /usr/sbin/pcscd and overwrite it with a compiled version without the libhal support. There are quite some options to give to the ./configure for this, here they are:
		+
		+	./configure --disable-libhal --enable-libusb --enable-usbdropdir=/usr/lib/pcsc/drivers/ --enable-ipcdir=/var/run/pcscd/ --prefix=/usr/ --enable-runpid=/var/run/pcscd/pcscd.pid
		+
		+	Then you just run pcscd:
		+
		+	# /usr/sbin/pcscd -f -d -a

Phil at 12:32, 25 June 2008

Phil — Wed, 25 Jun 2008 12:32:11 GMT

←Older revision		Revision as of 12:32, 25 June 2008
Line 65:		Line 65:
	00000027 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0		00000027 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0
	00006587 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000		00006587 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x0000, PID: 0x0000
		+
		+	= Debian EEE Setyup =
		+
		+	== Commands ==
		+
		+	== Remaining errors ==
		+
		+
		+	13431722 hotplug_libhal.c:305:get_driver() Looking a driver for VID: 0x076B, PID: 0x5321
		+	00000058 hotplug_libhal.c:342:HPAddDevice() Adding USB device: usb_device_76b_5321_noserial_if0
		+	01001266 readerfactory.c:1135:RFInitializeReader() Attempting startup of OMNIKEY CardMan 5x21 00 00 using /usr/lib/pcsc/drivers/ifdokrfid_lnx-2.6.0.bundle/Contents/Linux/ifdokrfid.so
		+	00074319 readerfactory.c:1002:RFBindFunctions() Loading IFD Handler 3.0
		+	OK OMNIKEY CardMan RFID IA32 v2.6.0 support@omnikey.com
		+	00000913 readerfactory.c:1174:RFInitializeReader() Open Port 200000 Failed (usb:076b/5321:libhal:/org/freedesktop/Hal/devices/usb_device_76b_5321_noserial_if0)
		+	00000377 readerfactory.c:1047:RFUnloadReader() Unloading reader driver.
		+	00000353 readerfactory.c:254:RFAddReader() OMNIKEY CardMan 5x21 init failed.
		+	00000301 hotplug_libhal.c:395:HPAddDevice() Failed adding USB device: usb_device_76b_5321_noserial_if0

Phil: /* EEE Setup */

Phil — Thu, 05 Jun 2008 15:20:15 GMT

EEE Setup

←Older revision		Revision as of 15:20, 5 June 2008
Line 20:		Line 20:
	* Installed driver from Omnikey reader		* Installed driver from Omnikey reader
	ifdokrfid_lnx-2.6.0.tar.gz		ifdokrfid_lnx-2.6.0.tar.gz
		+	* Installed swig for pyscard install
		+	apt-get install swig
		+	* Installed python-dev for pyscard install
		+	apt-get install python-dev
		+	* Linked PCSC includes in main location
		+	ln -s /usr/local/include/PCSC /usr/include/
		+

	== Solved errors ==		== Solved errors ==