Difference between revisions of "Tinc"

From Tmplab
(Keygeneration)
(All Nodes Configuration Directory Structure)
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
= Plan =
 +
 +
* here is the most basic setup
 +
* we assume the virtual network is 192.168.22.x.
 +
* Change it to whatever you like as private IPs.
 +
 
= Linux style Basic tinc-vpn setup =
 
= Linux style Basic tinc-vpn setup =
  
Line 9: Line 15:
 
                       tinc-up
 
                       tinc-up
 
                       tinc-down
 
                       tinc-down
 +
                      rsa_key.priv
 
                       hosts/
 
                       hosts/
 
                             client1
 
                             client1
Line 39: Line 46:
  
 
* to be run for each client
 
* to be run for each client
* tincd -n networkname -K4096
+
tincd -n networkname -K4096
 
* private key goes to /etc/tinc/networkname
 
* private key goes to /etc/tinc/networkname
 
* public key goes to /etc/tinc/networkname/hosts
 
* public key goes to /etc/tinc/networkname/hosts

Latest revision as of 11:19, 25 May 2016

Plan

  • here is the most basic setup
  • we assume the virtual network is 192.168.22.x.
  • Change it to whatever you like as private IPs.

Linux style Basic tinc-vpn setup

All Nodes Configuration Directory Structure

/etc/tinc/
          nets.boot
          networkname/
                      tinc.conf
                      tinc-up
                      tinc-down
                      rsa_key.priv
                      hosts/
                            client1
                            client2
                            ...
                            tincserver

nets.boot

networkname

tinc.conf for client1

Name=client1
Device=/dev/net/tun
ConnectTo=tincserver
AddressFamily = ipv4

tinc-up for client1

#!/bin/bash
ifconfig $INTERFACE 192.168.22.1 netmask 255.255.255.0

tinc-down for client1

#!/bin/bash
ifconfig $INTERFACE down

Keygeneration

  • to be run for each client
tincd -n networkname -K4096
  • private key goes to /etc/tinc/networkname
  • public key goes to /etc/tinc/networkname/hosts
  • add the first two lines as shown below according to client or server function

hosts/client1

Name=client1
Subnet=192.168.22.1
-----BEGIN RSA PUBLIC KEY-----
....
-----END RSA PUBLIC KEY-----

hosts/client2

Name=client2
Subnet=192.168.22.2
-----BEGIN RSA PUBLIC KEY-----
....
-----END RSA PUBLIC KEY-----

hosts/tincserver

Subnet=192.168.22.254
Address=SERVERPUBLICIP