Tinc: Difference between revisions
Samneurohack (talk | contribs) |
Samneurohack (talk | contribs) |
||
| Line 1: | Line 1: | ||
= | = Linux style Basic tinc-vpn setup = | ||
== Configuration Directory Structure == | == All Nodes Configuration Directory Structure == | ||
/etc/tinc/ | /etc/tinc/ | ||
| Line 35: | Line 35: | ||
#!/bin/bash | #!/bin/bash | ||
ifconfig $INTERFACE down | ifconfig $INTERFACE down | ||
== Keygeneration == | |||
* to be run for each client | |||
* tincd -n networkname -K4096 | |||
* private key goes to /etc/tinc/networkname | |||
* public key goes to /etc/tinc/networkname/hosts | |||
* add the first two lines as shown below according to client or server | |||
== hosts/client1 == | == hosts/client1 == | ||
Revision as of 09:11, 25 May 2016
Linux style Basic tinc-vpn setup
All Nodes Configuration Directory Structure
/etc/tinc/
nets.boot
networkname/
tinc.conf
tinc-up
tinc-down
hosts/
client1
client2
...
tincserver
nets.boot
networkname
tinc.conf for client1
Name=client1 Device=/dev/net/tun ConnectTo=TincServer AddressFamily = ipv4
tinc-up for client1
#!/bin/bash ifconfig $INTERFACE 192.168.22.2 netmask 255.255.255.0
tinc-down for client1
#!/bin/bash ifconfig $INTERFACE down
Keygeneration
- to be run for each client
- tincd -n networkname -K4096
- private key goes to /etc/tinc/networkname
- public key goes to /etc/tinc/networkname/hosts
- add the first two lines as shown below according to client or server
hosts/client1
Name=client1 Subnet=192.168.22.2 -----BEGIN RSA PUBLIC KEY----- .... -----END RSA PUBLIC KEY-----
hosts/client2
Name=client2 Subnet=192.168.22.3 -----BEGIN RSA PUBLIC KEY----- .... -----END RSA PUBLIC KEY-----
hosts/tincserver
Subnet=192.168.22.1 Address=SERVERPUBLICIP