Difference between revisions of "Arduino screen"

From Tmplab
(Sketch)
(Sketch)
Line 27: Line 27:
 
== Sketch ==
 
== Sketch ==
  
With previous explanations the u8glib examples should work like a charm (tested on Nano)  
+
With previous explanations the u8glib examples should work like a charm (tested on Nano)
 +
 
A basic sketch to display strings array and a pin value is available.
 
A basic sketch to display strings array and a pin value is available.
 
Ask contact at tmplab.org if it's not available soon on [https://github.com/tmplab git]
 
Ask contact at tmplab.org if it's not available soon on [https://github.com/tmplab git]

Revision as of 22:18, 30 January 2016

Easy Arduino TFT screen

Hardware

  • you want to display some data/state of your arduino
  • If you're fed up or can't use the serial line

Try the very cheap tft screen for arduino.

Pictures+Library u8glib on github

It can be as low as 4 pin to connect in i2c :

  • VCC (5V)
  • GND
  • SCL, a clock, goes by default to arduino A5 pin
  • SDA, for data, goes by default to arduino A4 pin

Software

If you use the 4 pin display and u8glib, the line you need to remove comment (// at the beginning) is :

U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NO_ACK); // Display which does not send AC

See u8glib examples sketch.

Sketch

With previous explanations the u8glib examples should work like a charm (tested on Nano)

A basic sketch to display strings array and a pin value is available. Ask contact at tmplab.org if it's not available soon on git